BCQKH - A-1273-B1,EPOXY ADHESIVE
- MSDS: BCQKH
- Manufacturer: B F GOODRICH ENGINEERED PRODUCTS GROUP
- Product Name: A-1273-B1,EPOXY ADHESIVE
- National Stock Number: 8040-00N008485
Product Identification
Product ID:A-1273-B1,EPOXY ADHESIVE
MSDS Date:01/01/1987
FSC:8040
NIIN:00N008485
MSDS Number: BCQKH
Responsible Party
Emergency Phone: 216-374-3422,TO 5PM
Cage: HO358
Contractor
Telephone: 216-374-3000
Cage: 03481
Ingredients
EPOXY LIQUIDRESIN
Fraction By Weight: 67%
ACGIH TLV: NOT ESTAB (MFR)
EPOXIDIZED ALKYLATED PHENOLIC RESIN
Fraction By Weight: 3%
ACGIH TLV: NOT ESTAB (MFR)
Hazards
Effects of Overexposure:SKIN CONT:PRLNG/RPTD CONTACT MAY CAUSE
IRRIT,SENSITIZATN,ALLERGIC RXN IN SOME PERSONS.EYE CONT:IRRIT
First Aid
First Aid:EYES:FLUSH W/PLENTY OF WATER FOR 15 MINUTES HOLDING EYELIDS
OPEN,SEE A PHYSICIAN. SKIN:REMOVE CONTAMINATED CLOTHING,WASH AREA
W/PLENTY OF SOAP & WATER,IF IRRITATION DEVELOPS SEE A PHYSICIAN.
INGESTION :CALL A PHYSICIAN .
Fire Fighting
Flash Point:NONE
Extinguishing Media:CARBON DIOXIDE,FOAM,DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE GEAR .
Accidental Release
Spill Release Procedures:AVOID SKIN & EYE CONTACT. SCRAPE UP W/PAPER OR
SCOOP,PLACE IN SUITABLE CONTAINER FOR DISPOSAL.
Handling
Handling and Storage Precautions:CAUTION:CONTAINS EPOXY RESINS. MAY
CAUSE SKIN&EYE IRRIT. AVOID SKIN&EYE CONTACT. WASH HANDS AFTER USE.
STORE IN TIGHTLY CLOSED CNTNR IN COOL,DRY PLACE
Other Precautions:EMPTY CNTNRS OF THIS MATL MAY BE HAZARDOUS SINCE THEY
MAY CONTAIN RESIDUAL LIQUID. ALL PRECAUTNS CITED SHOULD BE OBSERVED
W/SUCH CNTNRS. FOR INDUSTRIAL USE ONLY.
Exposure Controls
Ventilation:LOCAL EXHAUST MAY BE NEEDED IF HEAT TO HIGH TEMPERATURE.
Protective Gloves:PLASTIC/RUBBER
Eye Protection:GOGGLES
Supplemental Safety and Health
EMERGENCY PHONE #:(AFTER 5 PM) 216-374-2224. DATE OF PREP:7/23/82.
Chemical Properties
Spec Gravity:1.36
Solubility in Water:NIL
Appearance and Odor:THICK GREEN PASTE W/EPOXY ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO,CO*2,ALDEHYDES,ACIDS,OTHERS
POSSIBLE
Conditions to Avoid Polymerization:DONT MIX IN LRG AMTS;NO MORE THAN 2
LBS TOTAL MIXTURE RECM.
Disposal
Waste Disposal Methods:THIS MATERIAL IF DISCARDED IS NOT DEFINED AS
HAZARDOUS BY 40CFR261. DISPOSAL METHOD:INCINERATE OR LANDFILL IN
ACCORDANCE W/APPLICABLE FEDERAL,STATE & LOCAL LAWS & REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.